Flex-Drain 50110 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 25-Foot

Flex-Drain 50110 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 25-Foot Review

Flex-Drain 50110 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 25-Foot Feature

• Pipe unfolds and expands from 2 to 25-feet
• Solid pipe helps move water from one point to another
• Exceeds all applicable ASTM Standards
• Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC
• 30-Percent higher load-bearing rating than standard corrugated pipe

Flex-drain 50110 flexible/expandable landscaping drain pipe, solid, 25-foot a solid pipe, appropriate in applications that involve moving water from one point to another (i.e. Away from downspouts). Does not allow water to seep in or out anywhere except pipe ends. Works effortlessly with our complete system of connectors, couplers and adaptors. Exceeds all applicable astm standards. Made with no-break copolymers for professional grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30-percent higher load-bearing rating than standard corrugated pipe. Guaranteed not to split, crack or break when used in accordance with local building codes. Flex-drain is compatible with virtually all traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc. All flex-drain products are made in america.

Anvil 8700155255, Steel Pipe Fitting, Nipple, 2" NPT Male x 3" Length, Galvanized Finish

Anvil 8700155255, Steel Pipe Fitting, Nipple, 2" NPT Male x 3" Length, Galvanized Finish Review

Anvil 8700155255, Steel Pipe Fitting, Nipple, 2" NPT Male x 3" Length, Galvanized Finish Feature

• Nipple for joining two pipes or extending pipe length
• Male National Pipe Taper (NPT) threads on both ends for connecting female threaded pipes and fittings
• Made from steel for greater rust resistance than iron
• NPT threads for creating tighter seals than straight threads
• Meets specifications ASTM A53 and ASME B 1.20.1 for quality assurance

This Anvil nipple is a schedule 40 steel pipe fitting with a galvanized finish and male National Pipe Taper (NPT) threads on both ends for joining two pipes or extending pipe length. It has NPT threads for creating a tighter seal than straight threads. This fitting is made of steel and has a galvanized finish to provide greater rust resistance than iron and can be used for water, steam, and air applications. This schedule 40 nipple meets specifications ASTM A53 and ASME B 1.20.1 for quality assurance.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anvil International provides pipe products and design services. The company, founded in 1850 and headquartered in Portsmouth, NH, meets International Organization for Standardization (ISO) 9001:2000 standards and is certified by the American Petroleum Institute (API). Its fittings meet American Society for Testing and Materials (ASTM) and American Society of Mechanical Engineers (ASME) specifications.

Mr. Heater F273756 1/4" Male Pipe Thread x P.O.L. with Handwheel Fitting

Mr. Heater F273756 1/4" Male Pipe Thread x P.O.L. with Handwheel Fitting Review

Mr. Heater F273756 1/4" Male Pipe Thread x P.O.L. with Handwheel Fitting Feature

• Made in USA
• Brass fitting
• One Year Warranty
• Soft nose POL
• Converts 1" male pipe thread to female POL
• 90 day warranty
• Converts 1/-inch MPT to female POL

1/4" male pipe x restricted flow soft nose P.O.L. with handwheel

David's Greenhouse 4 Way Elbow for 1 Inch PVC Pipe 4 per Box

David's Greenhouse 4 Way Elbow for 1 Inch PVC Pipe 4 per Box Review

David's Greenhouse 4 Way Elbow for 1 Inch PVC Pipe 4 per Box Feature

• Fitting can be used for furniture and other PVC projects
• Edges are beveled to give a smooth apperance to any project
• Build pipe structures like Greenhouses, Furniture, Cold Frames, Safety Shields, and Shelving.
• All the fittings work with regular PVC water pipe, our utility grade, unprinted pipe or our furniture quality pipe.
• Satisfaction is guaranteed

Build pipe structures like Greenhouses, Furniture, Cold Frames, Safety Shields, and Shelving. All the fittings work with regular PVC water pipe, our utility grade, unprinted pipe or our furniture quality pipe. Not for high pressure water use.

NIBCO ABS Pipe Fitting, Adapter, Schedule 40, 2" Spigot x 2" NPT Female

NIBCO ABS Pipe Fitting, Adapter, Schedule 40, 2" Spigot x 2" NPT Female Review

NIBCO ABS Pipe Fitting, Adapter, Schedule 40, 2" Spigot x 2" NPT Female Feature

• ABS-DWV (drain, waste and vent) fittings are used for residential and commercial sanitary systems; Do not test or use with compressed air or other gases
• Solvent weld connections; Never use primer with ABS
• Used with ABS DWV pipe
• 2" Spigot x 2" NPT Female
• Service temperature range: -40°F to 180°F

The NIBCO ABS DWV female adapter is used in residential and commercial drain, waste and vent systems. The ABS DWV female adapter features a spigot x female NPT thread connection and provides a means for adapting a solvent weld connection to a threaded connection. Please refer to NIBCO technical data sheets and catalogs for engineering and installation information. Acrylonitrile-Butadiene-Styrene (ABS) is resistant to a wide variety of materials ranging from sewage to commercial household chemical formulations and can be exposed to a wide temperature span. ABS is lightweight, safe to handle and easy to install. ABS DWV is joined by solvent cementing or threading and can easily be connected to steel, copper, or cast iron through the use of transition fittings. NIBCO plastic fittings are backed by a 5-year limited warranty. Because of its longstanding reputation for innovation and precision in design and manufacturing, NIBCO is the preferred brand in the industry.

Mr. Heater F273754 1/4" Male Pipe Thread x 1"-20 Female Throwaway Cylinder Thread Fitting

Mr. Heater F273754 1/4" Male Pipe Thread x 1"-20 Female Throwaway Cylinder Thread Fitting Review

Mr. Heater F273754 1/4" Male Pipe Thread x 1"-20 Female Throwaway Cylinder Thread Fitting Feature

• Made in USA
• Brass fitting
• One Year Warranty
• 1/4" male pipe thread x 1" x 20 Female throwaway cylinder thread
• 90 day warranty
• 1/4-inch mpt by 1-inch by 20 female throwaway cylinder thread

1/4" male pipe x 1" x 20 female throwaway cylinder thread

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings Review

Cash Acme U249A Shark Bite 1/2-by-1/2-Inch Drop Ear Elbow Push Pipe Fittings Feature

• Easy, quick push-fit connection of water distribution pipe , this item cannot ship to CA or VT
• Design certified and listed to ASSE 1061/NSF 61
• Listed by IAPMO and certified for potable and hydronic heating water distribution
• Certified for underground applications and as a manufactured joint without access panels
• Meet UPC, IPC and CUPC requirements

Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 P.S.I. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.

Genova Products 30707CP 3/4-Inch 90 Degree PVC Pipe Elbow - 10 Pack

Genova Products 30707CP 3/4-Inch 90 Degree PVC Pipe Elbow - 10 Pack Review

Genova Products 30707CP 3/4-Inch 90 Degree PVC Pipe Elbow - 10 Pack Feature

• Used to change direction in piping
• Conveniently packaged in quantities of 10
• Ideal for irrigation and underground residential sprinkler systems
• Schedule 40 Pressure Fitting
• Made in the USA

Standard weight pressure fitting for I.P.S. standard Schedule 40 pipe. Pipe solvent welds into both ends. S x S.

Pipe Trades Pro 4095 Advanced Pipe Trades Math Calculator

Pipe Trades Pro 4095 Advanced Pipe Trades Math Calculator Review

Pipe Trades Pro 4095 Advanced Pipe Trades Math Calculator Feature

• Pipe Trades functions: Right-Angles, Offsets and Complex Rolling Offsets, Fitting Angles, Bends, Angle/Slope, Percentage Grades, Drops, Feet-Inch-Fractions and Trig, Parallel Pipe Cutbacks, Pipe Areas, Fill Weights
• Built-In-Pipe data with 7 different materials: Steel, Stainless Steel, Brass, Aluminum, Cast Iron, Plastic and Copper. Instantly solve pipe outside diameter, internal diameter, wall thickness, weight per foot, filled weight per foot, pipe internal data
• Flow Rates, Velocity Force, Volumes, Liquid conversions, Temperature conversions, Paperless tape, Material Costing
• Works directly in Yards, Feet, Inches, Fractions and Meters - including square and cubic formats. No need to convert to decimals.
• Includes 2 Long life lithium batteries and a Armadillo Gear protective case

The Pipe Trades Pro Advanced Pipe Trades Math Calculator gives pipefitters, steamfitters, sprinklerfitters and welders instant answers for all pipe layout and design problems, including complex rolling offsets, parallel pipe cutbacks, weight/volume conversions, flow rates, pressures, areas and more. Recommended For: Pipe trade professionals, Recommended Use: Advanced pipe trades / math calculator, Measures: Feet, inch, fractions, and trigonometry, Accuracy: 12-digit internal accuracy, Display Type: 12 digits (8 normal, 4 fractions) with full annunciators, Auto Shutdown: Yes, Battery Type: 1.5V (LR-44/A76), Battery Included: Yes (2), Dimensions L x W x H (in.): 5 5/8 x 3 x 5/8

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot Review

Flex-Drain 54001 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 8-Foot Feature

• Advanced design for superior performance; solid pipe helps move water to a drain from your downspout diverter, rain gutter and more
• Exceeds the following ASTM standards, flex-drain outperforms the leading brand of corrugated pipe with brittleness, stiffness, and joint integrity
• Engineered to outperform, installs faster, requires 1/5th the storage and transport space, and perforated pipe has 14 percent better flow rate
• Outperforms in freeze and thaw conditions, also has 30-percent higher load-bearing rating from our patented peak and valley design
• Solid drain-pipe expands in length from 2 to 8-feet - compatible with most traditional 3-inches and 4-inches corrugated pipe and 4-inches pvc
• Advanced design for superior performance - outperforms in freeze and thaw conditions, also has 30-percent higher load-bearing rating from our patented peak and valley design
• Engineered to outperform - Installs faster, requires 1/5th the storage and transport space, and perforated pipe has 14% better flow rate
• Exceeds the following astm standards - flex-drain outperforms the leading brand of corrugated pipe with brittleness, stiffness, and joint integrity
• Solid drain-pipe expands in length from 2 to 8-feet - compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc
• Solid pipe helps move water to a drain from your downspout diverter, rain gutter, and more

a solid pipe, appropriate in applications that involve moving water from one point to another (i.e. Away from downspouts). Does not allow water to seep in or out anywhere except pipe ends. Works effortlessly with our complete system of connectors, couplers and adaptors. Exceeds all applicable astm standards. Made with no-break copolymers for professional grade strength and integrity. Proprietary peak and valley design offers greater surface area and a 30-percent higher load-bearing rating than standard corrugated pipe. Guaranteed not to split, crack or break when used in accordance with local building codes. Flex-drain is compatible with virtually all traditional 3-inch and 4-inch corrugated pipe and 4-inch pvc. All flex-drain products are proudly Made In America.

Anvil 8700163051, Malleable Iron Pipe Fitting, Union, 1" NPT Female, Black Finish

Anvil 8700163051, Malleable Iron Pipe Fitting, Union, 1" NPT Female, Black Finish Review

Anvil 8700163051, Malleable Iron Pipe Fitting, Union, 1" NPT Female, Black Finish Feature

• Union pipe fitting for joining two pipes
• Female National Pipe Taper (NPT) threads on both ends for connecting to male pipes
• Made from malleable iron for tensile strength
• National Pipe Taper (NPT) threads for creating tighter seals than straight threads
• Black finish for rust resistance in oil and gas applications

This Anvil union is a malleable iron pipe fitting with female National Pipe Taper (NPT) threads for connecting two pipes. It has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings. This union has NPT threads on both ends for creating tighter seals than straight threads. It is made of malleable iron, which has high tensile strength, and has a black finish that resists rust in oil and gas applications. This class 150 fitting meets standards ASTM A-197, ASME B 1.20.1, and ASME B 16.3 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Anvil International provides pipe products and design services. The company, founded in 1850 and headquartered in Portsmouth, NH, meets International Organization for Standardization (ISO) 9001:2000 standards and is certified by the American Petroleum Institute (API). Its fittings meet American Society for Testing and Materials (ASTM) and American Society of Mechanical Engineers (ASME) specifications.

1" 5-way Cross PVC Fitting Connector

1" 5-way Cross PVC Fitting Connector Review

1" 5-way Cross PVC Fitting Connector Feature

• Unique product not sold in stores, available online only.
• Made from impact proof, ultra-premium furniture-grade PVC.
• Superior, glossy surface finish.
• UV Stabilized for outdoor color retention.
• Tapered ends for a clean, transitional appearance.

This is not your standard plumbing-grade PVC fitting. FORMUFIT PVC fittings let you create anything with PVC pipe! This tee connects 1" (1.315") PVC pipe at five points, vertically and horizonally, including its center. Ideal for support center support within a structure or application.

Cash Acme U308A Shark Bite 1/2-by-1/2-Inch FNPT Elbow Push Pipe Fittings Adapter

Cash Acme U308A Shark Bite 1/2-by-1/2-Inch FNPT Elbow Push Pipe Fittings Adapter Review

Cash Acme U308A Shark Bite 1/2-by-1/2-Inch FNPT Elbow Push Pipe Fittings Adapter Feature

• Easy, quick push-fit connection of water distribution pipe , this item cannot ship to CA or VT
• Design certified and listed to ASSE 1061/NSF 61
• Listed by IAPMO and certified for potable and hydronic heating water distribution
• Certified for underground applications and as a manufactured joint without access panels
• Meets UPC, IPC and CUPC requirements

Brass push fitting. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC and is rated at 200 F., 200 P.S.I. It is made of a 1 piece DZR brass, which is a noncorrosive, low lead material. Fittings can be buried and placed behind drywall. Fittings are removeable and reuseable. Product is individually bagged.